ACTI-PEN is a new way of applying superglue activator. It is an established industry problem that oversprayed activator can stain PVCu. Now the application of activator is totally controllable and due to its blue colour, it can be applied with absolute precision, any excess can be easily identified and cleaned with Everbuild PVCu solvent cleaner. Will cover approximately the same area as 3 x 200ml tins of standard aerosol activator spray. Halves the setting time of conventional activated superglue. Works on most common surfaces and is suitable for use with all cryanocrylate superglues.

This all purpose cyanoacrylate glue bonds most surfaces in seconds, including Plastic, Wood, Metals, Ceramics, Leather, Porcelain, plus a whole lot more.

Used to replace nails and screws to fix skirting boards, carpet edging, floor boards e.t.c.

Formulated for materials that are non-porous (metals, plastics etc) EXTRA has a quick cure time and extra bond strength.

The well known brand used throughout the DIY market.

A high modulas acetic cure, 100% silicon adhesive designed for use in aquarium manufacture and other similar environments. Meets BS5889 (B)
C3 310ml

PINKGRIP has become a firm favourite with tradesmen due to its revolutionary initial grip, which outperforms every competitor tested. Grips instantly - No Slip - No Pins! PINKGRIP will stick just about anything on a building site that needs sticking. Its amazing grabbing strength not only removes the need to pin under the workpiece to prevent slippage, but its revolutionary initial ‘Direct Bond’ eliminates the need for double stick methods. PINKGRIP can be used inside and outside and adheres to just about every building substrate. C3 Cartridge.

Takes all types of C3 cartridge (310ml).

Designed to remove marks from newly installed PVCu window frames and fascia sections, the cleaner will restore an ‘As new’ finish to older installations and plastic garden furniture, etc.

uPVC Felt Replacement has been designed to fit under the existing felt on the bottom row of roof tiles, they inter-lock to help prevent rain from being blown into the roof space. Black 1.5M Long.

uPVC Vented Felt Replacement has been designed to fit under the existing felt on the bottom row of roof tiles, they inter-lock to help prevent rain from being blown into the roof space at the same time as allowing air to circulate helping to prevent the build up of moisture. Black 0.9M Long.

uPVC Vented Felt Replacement with Bird Comb has been designed to fit under the existing felt on the bottom row of roof tiles, they inter-lock to help prevent rain from being blown into the roof space at the same time as keeping out unwanted birds from nesting and allows air to circulate. Black 0.9M Long.

Fitted into a 70mm diameter hole drilled through the soffit between each pair of structural timbers.

Ideal to fit Vent Discs into uPVC Soffit Boards. The hardened HSS teeth also give a fast, clean cut in metals, plastic and wood.