Edit Your Basket Check Out
Order Online or Call 0845 165 165 8 or 0207 474 0474 Fax 0207 474 5055

John Guest Speedfit Plumbing

Shop | Bargain Box |  John Guest Speedfit Plumbing


Speedfit 15 & 22mm Pushfit Plumbing

John Guest 15 & 22mm push fit plumbing. This latest generation of Plastic Plumbing from the UK’s leading manufacturer conforms to Building Code BS7291 (Parts 1 & 3) and is approved by the Water Regulation Authority for use on both Hot & Cold Water Services, including sealed and open vented Central Heating Systems. Far easier to use than copper pipe and fittings, SPEEDFIT does not require a blowtorch to be used in confined spaces, does away with the risk of finding incomplete soldered joints when the water is turned on, and because the pipe is flexible, pipe runs can be installed through holes deep in the joists, rather than in notches immediately below the floor boards with their attendant risk of a carelessly placed nail. SPEEDFIT has distinct advantages over copper when delivering Hot Water. The inner blue surface is specially formulated to resist corrosion and lime scale. As the pipes are thermally efficient, they are safe to touch and heat is contained within the system until it is delivered to where you want it.


Speedfit Installation Guide

To help our customers we have included the manufacturers installation guide. Each application is different and if you are unsure then contact a qualified tradesman for advice. Speed Fit Installation Guide


15mm SpeedFit

The first part of this page contains mainly 15mm pipe and fittings, as you scroll down you will find the 22mm fittings.

3M x 15mm SpeedFit Barrier Pipe

3M x 15mm SpeedFit Barrier Pipe

Ref: SFP13


£3.99 (£4.79 IncVAT)

Qty:

These 3M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs.

People who bought this item also bought:

1. 22mm SpeedFit Stop End (Ref: SFB2)
2. 10 - 22mm SpeedFit Pipe Cutter (Ref: SFPC)
3. 15mm SpeedFit Equal Elbow (Ref: SFEE1)

25M x 15mm SpeedFit Barrier Pipe

25M x 15mm SpeedFit Barrier Pipe

Ref: SFP125


£23.99 (£28.79 IncVAT)

Qty:

These 25M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs.

People who bought this item also bought:

1. 15mm SpeedFit Equal Tee (Ref: SFET1)
2. 15mm SpeedFit Equal Elbow (Ref: SFEE1)
3. 15mm SpeedFit Straight Tap Connector (Ref: SFST1)

15mm SpeedFit Super Seal

15mm SpeedFit Super Seal

Ref: SFSS1


£0.24 (£0.29 IncVAT)

Qty:

These Super Seal Inserts are designed to be fitted into the end of the Barrier Pipe to give the extra Seal when fitted into any of the coupling featured

People who bought this item also bought:

1. 10 - 22mm SpeedFit Pipe Cutter (Ref: SFPC)
2. 15mm SpeedFit Plastic Service Valve (Ref: SFSV1)
3. 15mm SpeedFit Equal Tee (Ref: SFET1)

15mm SpeedFit Straight Connector

15mm SpeedFit Straight Connector

Ref: SFSC1


£1.29 (£1.55 IncVAT)

Qty:

An inline straight connector for joining 2 pieces of pipe.

People who bought this item also bought:

1. 10 - 22mm SpeedFit Pipe Cutter (Ref: SFPC)
2. 15mm SpeedFit Plastic Service Valve (Ref: SFSV1)
3. 15mm SpeedFit Equal Elbow (Ref: SFEE1)

15mm SpeedFit Equal Elbow

15mm SpeedFit Equal Elbow

Ref: SFEE1


£1.99 (£2.39 IncVAT)

Qty:

A standard 90 degree bend.

People who bought this item also bought:

1. 15mm SpeedFit Equal Tee (Ref: SFET1)
2. 15mm SpeedFit Straight Connector (Ref: SFSC1)
3. 25M x 15mm SpeedFit Barrier Pipe (Ref: SFP125)

15mm SpeedFit Equal Tee

15mm SpeedFit Equal Tee

Ref: SFET1


£1.99 (£2.39 IncVAT)

Qty:

A Standard Tee Piece for splitting the circuit

People who bought this item also bought:

1. 15mm SpeedFit Equal Elbow (Ref: SFEE1)
2. 15mm SpeedFit Plastic Service Valve (Ref: SFSV1)
3. 10 - 22mm SpeedFit Pipe Cutter (Ref: SFPC)

15mm SpeedFit Stop End

15mm SpeedFit Stop End

Ref: SFB1


£1.49 (£1.79 IncVAT)

Qty:

As the name suggests, an easy fitted blank cap

People who bought this item also bought:

1. 10 - 22mm SpeedFit Pipe Cutter (Ref: SFPC)
2. 2.5M 100mm x 100mm Angle (Ref: LA210W)
3. 5M 100mm x 100mm Angle (Ref: LA510W)

15mm SpeedFit Straight Tap Connector

15mm SpeedFit Straight Tap Connector

Ref: SFST1


£2.19 (£2.63 IncVAT)

Qty:

Designed to fit directly onto the base of your taps to allow simple connection. The connectors only require hand tightening when fitted.

People who bought this item also bought:

1. 15mm SpeedFit Equal Elbow (Ref: SFEE1)
2. 15mm SpeedFit Equal Tee (Ref: SFET1)
3. 25M x 15mm SpeedFit Barrier Pipe (Ref: SFP125)

15mm SpeedFit Female Coupler

15mm SpeedFit Female Coupler

Ref: SFFC1


£0.86 (£1.03 IncVAT)

Qty:


People who bought this item also bought:

1. 25M x 15mm SpeedFit Barrier Pipe (Ref: SFP125)
2. Edge Trim for 2mm & 3mm Sheets (Ref: FTE2)
3. External Corner for 2mm & 3mm Sheets (Ref: FTEC2)

15mm SpeedFit Stem Elbow

15mm SpeedFit Stem Elbow

Ref: SFSE1


£2.29 (£2.75 IncVAT)

Qty:

Stem elbows are used to ad a bend to an existing straight run without having to remove the present fixings

15mm SpeedFit Tank Connector

15mm SpeedFit Tank Connector

Ref: SFTC1


£1.89 (£2.27 IncVAT)

Qty:

Exactly what it says. To allow barrier pipe to be connected to existing tanks.

15mm SpeedFit Brass Stop Valve

15mm SpeedFit Brass Stop Valve

Ref: SFBV1


£5.94 (£7.13 IncVAT)

Qty:

These Brass Stop Valves are easily fitted

15mm SpeedFit Plastic Service Valve

15mm SpeedFit Plastic Service Valve

Ref: SFSV1


£2.89 (£3.47 IncVAT)

Qty:

The simple inline service valves are ideal for isolating areas of the system to allow serviceing to be carried out on parts of the system

People who bought this item also bought:

1. 15mm SpeedFit Equal Tee (Ref: SFET1)
2. 15mm SpeedFit Equal Elbow (Ref: SFEE1)
3. 25M x 15mm SpeedFit Barrier Pipe (Ref: SFP125)

15mm SpeedFit Pipe Clips

15mm SpeedFit Pipe Clips

Ref: SFPC1


£0.16 (£0.19 IncVAT)

Qty:

Fix the pipe clips, lay your pipe in, then snap over the cap to hold it securely. It's as simple as that.

People who bought this item also bought:

1. Edge Trim for 2mm & 3mm Sheets (Ref: FTE2)
2. 25M x 15mm SpeedFit Barrier Pipe (Ref: SFP125)
3. External Corner for 2mm & 3mm Sheets (Ref: FTEC2)

SpeedFit Pipe Clip Spacers

SpeedFit Pipe Clip Spacers

Ref: SFPCS


£0.14 (£0.17 IncVAT)

Qty:

These spacers are designed to simply fit in the back of the pipe clip. Some applications require the pipe to protrude from more. These spacers save you from having to fix blocks then attach the pipe clip.

People who bought this item also bought:

1. 15mm SpeedFit Pipe Clips (Ref: SFPC1)
2. 22mm SpeedFit Pipe Clips (Ref: SFPC2)
 

300mm SpeedFit Flexi Hose Tap Connector

300mm SpeedFit Flexi Hose Tap Connector

Ref: SFTC13


£2.89 (£3.47 IncVAT)

Qty:

These 300mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections.

People who bought this item also bought:

1. 300mm SpeedFit Flexi Hose Double Push Fit (Ref: SFPB13)
2. uPVC Felt Replacement 1.5M (Ref: DFR)
3. 2mm 2440mm x 1220mm PVC White (Ref: FP284W)

500mm SpeedFit Flexi Hose Tap Connector

500mm SpeedFit Flexi Hose Tap Connector

Ref: SFTC15


£4.19 (£5.03 IncVAT)

Qty:

These 500mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections.

People who bought this item also bought:

1. 0.98M x 16mm Sheet End Closure White (Ref: UT1)
2. 16mm Vent Tape (Ref: TV16)
3. 16mm Aluminium Tape (Ref: TA16)

300mm SpeedFit Flexi Hose Double Push Fit

300mm SpeedFit Flexi Hose Double Push Fit

Ref: SFPB13


£3.78 (£4.54 IncVAT)

Qty:

These 300mm long fully flexible connectors come with a speed fit connector on both ends. This allows for fast and secure connections on systems where the pipes do not meet.

People who bought this item also bought:

1. 15mm SpeedFit Female Coupler (Ref: SFFC1)
2. Edge Trim for 2mm & 3mm Sheets (Ref: FTE2)
3. External Corner for 2mm & 3mm Sheets (Ref: FTEC2)

500mm SpeedFit Flexi Hose Double Push Fit

500mm SpeedFit Flexi Hose Double Push Fit

Ref: SFPB15


£5.49 (£6.59 IncVAT)

Qty:

These 500mm long fully flexible connectors come with a speed fit connector on both ends. This allows for fast and secure connections on systems where the pipes do not meet.

People who bought this item also bought:

1. 0.98M x 16mm Sheet End Closure White (Ref: UT1)
2. 16mm Vent Tape (Ref: TV16)
3. 16mm Aluminium Tape (Ref: TA16)

SpeedFit Reducing Straight Coupler

SpeedFit Reducing Straight Coupler

Ref: SFRC


£2.69 (£3.23 IncVAT)

Qty:

A straight coupler with a 15mm push fit one end and a 22mm push fit the other end.

People who bought this item also bought:

1. 25M x 22mm SpeedFit Barrier Pipe (Ref: SFP225)
2. 22mm SpeedFit Stop End (Ref: SFB2)
3. 15mm SpeedFit Equal Elbow (Ref: SFEE1)

22mm SpeedFit Push fit Reducer

22mm SpeedFit Push fit Reducer

Ref: SFR21


£1.49 (£1.79 IncVAT)

Qty:

A 22mm push fit on one end and a 15mm pipe on the other.

SpeedFit Reducing Tees

SpeedFit Reducing Tees

Ref: SFRT


£1.99 (£2.39 IncVAT)

There are 4 Reducing Tees avaliable. Please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22

15mm x 15mm x 22mm SpeedFit Reducing Tee

15mm x 15mm x 22mm SpeedFit Reducing Tee

Ref: SFRT112


£3.09 (£3.71 IncVAT)

Qty:

There are 4 Reducing Tees avaliable. Please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22

22mm x 15mm x 15mm SpeedFit Reducing Tee

22mm x 15mm x 15mm SpeedFit Reducing Tee

Ref: SFRT211


£3.09 (£3.71 IncVAT)

Qty:

There are 4 Reducing Tees avaliable. Please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22

22mm x 15mm x 22mm SpeedFit Reducing Tee

22mm x 15mm x 22mm SpeedFit Reducing Tee

Ref: SFRT212


£3.09 (£3.71 IncVAT)

Qty:

There are 4 Reducing Tees avaliable. Please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22

22mm x 22mm x 15mm SpeedFit Reducing Tee

22mm x 22mm x 15mm SpeedFit Reducing Tee

Ref: SFRT221


£3.09 (£3.71 IncVAT)

Qty:

There are 4 Reducing Tees avaliable. Please check you have selected the correct combination using the picture shown. All sizes are listed as 1 x 2 x 3 so a "SFRT112" is a (1)15 x (2)15 x (3)22

People who bought this item also bought:

1. 25M x 22mm SpeedFit Barrier Pipe (Ref: SFP225)
2. 22mm SpeedFit Stop End (Ref: SFB2)
3. 15mm SpeedFit Equal Elbow (Ref: SFEE1)


22mm SpeedFit

The first part of this page contains 22mm pipe and fittings

3M x 22mm SpeedFit Barrier Pipe

3M x 22mm SpeedFit Barrier Pipe

Ref: SFP23


£5.99 (£7.19 IncVAT)

Qty:

These 3M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs.

25M x 22mm SpeedFit Barrier Pipe

25M x 22mm SpeedFit Barrier Pipe

Ref: SFP225


£41.99 (£50.39 IncVAT)

Qty:

These 25M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs.

People who bought this item also bought:

1. 15mm SpeedFit Straight Connector (Ref: SFSC1)
2. 6" Bitumen Flash Reel with Aluminium Face (Ref: FR6)
3. Bitumen Primer (Ref: FRP)

22mm SpeedFit Super Seal

22mm SpeedFit Super Seal

Ref: SFSS2


£0.29 (£0.35 IncVAT)

Qty:

These Super Seal Inserts are designed to be fitted into the end of the Barrier Pipe to give the extra Seal when the fitted into any of the coupleing featured

People who bought this item also bought:

1. 25M x 22mm SpeedFit Barrier Pipe (Ref: SFP225)
2. 22mm SpeedFit Stop End (Ref: SFB2)
3. 15mm SpeedFit Equal Elbow (Ref: SFEE1)

22mm SpeedFit Straight Connector

22mm SpeedFit Straight Connector

Ref: SFSC2


£1.49 (£1.79 IncVAT)

Qty:

An inline straight connetor for joining 2 pieces of pipe.

People who bought this item also bought:

1. 25M x 22mm SpeedFit Barrier Pipe (Ref: SFP225)
2. 22mm SpeedFit Stop End (Ref: SFB2)
3. 15mm SpeedFit Equal Elbow (Ref: SFEE1)

22mm SpeedFit Equal Elbow

22mm SpeedFit Equal Elbow

Ref: SFEE2


£1.99 (£2.39 IncVAT)

Qty:

A standard 90 degree bend,

People who bought this item also bought:

1. 10 - 22mm SpeedFit Pipe Cutter (Ref: SFPC)
2. 22mm SpeedFit Stop End (Ref: SFB2)
3. 15mm SpeedFit Equal Elbow (Ref: SFEE1)

22mm SpeedFit Equal Tee

22mm SpeedFit Equal Tee

Ref: SFET2


£2.49 (£2.99 IncVAT)

Qty:

A Standard Tee Piece for splitting the circuit

People who bought this item also bought:

1. 10 - 22mm SpeedFit Pipe Cutter (Ref: SFPC)
2. 22mm SpeedFit Stop End (Ref: SFB2)
3. 15mm SpeedFit Equal Elbow (Ref: SFEE1)

22mm SpeedFit Stop End

22mm SpeedFit Stop End

Ref: SFB2


£1.59 (£1.91 IncVAT)

Qty:

As the name suggests, an easy fitted blank cap

People who bought this item also bought:

1. 10 - 22mm SpeedFit Pipe Cutter (Ref: SFPC)
2. 15mm SpeedFit Equal Elbow (Ref: SFEE1)
3. 22mm SpeedFit Equal Elbow (Ref: SFEE2)

22mm SpeedFit Straight Tap Connector

22mm SpeedFit Straight Tap Connector

Ref: SFST2


£2.99 (£3.59 IncVAT)

Qty:

Designed to fit directly onto the base of your taps to allow simple connection. The connectors only require hand tightening when fitted.

22mm SpeedFit Stem Elbow

22mm SpeedFit Stem Elbow

Ref: SFSE2


£3.89 (£4.67 IncVAT)

Qty:

Stem elbows are used to add a bend to an existing straight run without having to remove the present fixings

22mm SpeedFit Tank Connector

22mm SpeedFit Tank Connector

Ref: SFTC2


£2.19 (£2.63 IncVAT)

Qty:

Exactly what it says. To allow barrier pipe to be connected to existing tanks.

22mm SpeedFit Pipe Clips

22mm SpeedFit Pipe Clips

Ref: SFPC2


£0.17 (£0.20 IncVAT)

Qty:

Fix the pipe clips, lay your pipe in, then snap over the cap to hold it securely. Its as simple as that.

People who bought this item also bought:

1. 15mm SpeedFit Pipe Clips (Ref: SFPC1)
2. SpeedFit Pipe Clip Spacers (Ref: SFPCS)
 

SpeedFit Pipe Clip Spacers

SpeedFit Pipe Clip Spacers

Ref: SFPCS


£0.14 (£0.17 IncVAT)

Qty:

These spacers are designed to simply fit in the back of the pipe clip. Some applications require the pipe to protrude from more. These spacers save you from having to fix blocks then attach the pipe clip.

People who bought this item also bought:

1. 15mm SpeedFit Pipe Clips (Ref: SFPC1)
2. 22mm SpeedFit Pipe Clips (Ref: SFPC2)
 

300mm SpeedFit Flexi Hose Tap Connector

300mm SpeedFit Flexi Hose Tap Connector

Ref: SFTC23


£3.19 (£3.83 IncVAT)

Qty:

These 300mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections.

500mm SpeedFit Flexi Hose Tap Connector

500mm SpeedFit Flexi Hose Tap Connector

Ref: SFTC25


£4.99 (£5.99 IncVAT)

Qty:

These 500mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections.

People who bought this item also bought:

1. 25M x 22mm SpeedFit Barrier Pipe (Ref: SFP225)
2. 22mm SpeedFit Stop End (Ref: SFB2)
3. 15mm SpeedFit Equal Elbow (Ref: SFEE1)

300mm SpeedFit Flexi Hose Double Push Fit

300mm SpeedFit Flexi Hose Double Push Fit

Ref: SFPB23


£4.49 (£5.39 IncVAT)

Qty:

These 300mm long fully flexible connectors come with a speed fit connector on both ends. This alloes for fast and secure connections on systems where the pipe do not meet.

People who bought this item also bought:

1. 500mm SpeedFit Flexi Hose Double Push Fit (Ref: SFPB25)
 
 

500mm SpeedFit Flexi Hose Double Push Fit

500mm SpeedFit Flexi Hose Double Push Fit

Ref: SFPB25


£6.29 (£7.55 IncVAT)

Qty:

These 500mm long fully flexible connectors come with a speed fit connector on both ends. This alloes for fast and secure connections on systems where the pipe do not meet.

People who bought this item also bought:

1. 300mm SpeedFit Flexi Hose Double Push Fit (Ref: SFPB23)
 
 

SpeedFit 4 Port Rail Manifold

SpeedFit 4 Port Rail Manifold

Ref: SF4P


£9.99 (£11.99 IncVAT)

Qty:

This mult-purpose manifold allows expansion to systems in one easy solution with 3 x 22mm and 4 x 15mm outlets.

10 - 22mm SpeedFit Pipe Cutter

10 - 22mm SpeedFit Pipe Cutter

Ref: SFPC


£15.99 (£19.19 IncVAT)

Qty:

Specialy Designed for cutting barrier pipe these cutters leave a clean edge to help avoid damage to seals when assembling the speed fit range.

People who bought this item also bought:

1. 15mm SpeedFit Super Seal (Ref: SFSS1)
2. 15mm SpeedFit Equal Elbow (Ref: SFEE1)
3. 15mm SpeedFit Straight Connector (Ref: SFSC1)

15mm - 1/2" SpeedFit Straight Connector

15mm - 1/2" SpeedFit Straight Connector

Ref: SFOC1


£1.49 (£1.79 IncVAT)

Qty:

Designed for connecting old imperial copper pipe to modern 15mm

People who bought this item also bought:

1. 10 - 22mm SpeedFit Pipe Cutter (Ref: SFPC)
2. 22mm - 3/4" SpeedFit Straight Connector (Ref: SFOC2)
3. 22mm SpeedFit Stop End (Ref: SFB2)

22mm - 3/4" SpeedFit Straight Connector

22mm - 3/4" SpeedFit Straight Connector

Ref: SFOC2


£1.98 (£2.38 IncVAT)

Qty:

Designed for connecting old imperial copper pipe to moden 22mm

People who bought this item also bought:

1. 15mm - 1/2" SpeedFit Straight Connector (Ref: SFOC1)
2. 10 - 22mm SpeedFit Pipe Cutter (Ref: SFPC)
3. 22mm SpeedFit Stop End (Ref: SFB2)



London :- C & A Supplies Ltd, Bidder Street, London E16 4ST
Kent Branch :- C & A Building Plastics, Courteney Road, Gillingham, Kent ME8 0EZ

Tel 0845 165 165 8 or 0207 474 0474 Fax 0207 474 5055
Tel 01634 374444 Fax 01634 366644

Or send us an Email using the contact us link
Please see our delivery section for areas covered and contact details
All pages and graphics on this Web site are © Copyright of C & A Supplies Ltd

Site Designed By D.Beaumont

spacer
  • Sample Company
  • Bidder Street
  • London
  • E16 4ST, United Kingdom

London :- C & A Supplies Ltd, Bidder Street, London E16 4ST
Kent Branch :- C & A Building Plastics, Courteney Road, Gillingham, Kent ME8 0EZ

Tel 0845 165 165 8 or 0207 474 0474 Fax 0207 474 5055
Tel 01634 374444 Fax 01634 366644

Or send us an Email using the contact us link
Please see our delivery section for areas covered and contact details

© 2011 Sample Company