 Avon 2 Frame Supported Glazing Bars The Avon glazing bars are suitable for Conservatory Roofs, Carports, Gazebos and other such installations. These glazing bars, with all plastic construction, yields a high degree of insulation with non-scratch solid colours in a choice of white or brown (non-scratch means the bars are the same colour through the core). Suitable for 10 & 16mm polycarbonate sheets. For end bars use the same glazing bar and fit end bar infills featured down the page.
Choose to add the end caps now by ticking the box and save time, if you prefer you can add these when you buy your other accessories Click Image To Enlarge Warning: include_once(dpimagesupport.php): failed to open stream: No such file or directory in main on line 5 Warning: include_once(): Failed opening 'dpimagesupport.php' for inclusion (include_path='.;C:\php5\pear') in main on line 5
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 10mm End Bar Infills10mm End Bar Infills or Edge Beads as they used to be known, are used with Glen & Avon system glazing bars when using 6 & 10mm sheets. They are used to provide a finish to the first and last bar in the roof. They have been specially designed to mimic a polycarbonate sheet so as to allow the correct loading when the top cap of the glazing bar is pushed home, ensuring a uniform pressure on the polycarbonate sheets when fixed down. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16mm End Bar Infills16mm Edge Beads are used with the Avon system glazing bars when using 16mm sheets. They are used to provide a finish to the first and last bar in roof. They have been specially designed to mimic a polycarbonate sheet so as to allow the correct loading when the top cap of the glazing bar is pushed home, ensuring a uniform pressure on the polycarbonate sheets when fixed down. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 PVC Wall FlashingCan be used as an alternative to lead flashing, simply screw fix to the wall with 30mm (SPP30) polytop screws and seal along the top edge. This flashing is also for use with Peak 65 Wall Plates and is supplied with the Peak 130 Wall Plate, although you will require 18mm (SP18) polytop screws. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Important NoticeAll Plastic Building Materials should be kept flat during transport and storage. If the items are to be stacked then care must be taken not to overload the stack so as to crush the lower products, it it extremely important that all materials are covered with a LIGHT-PROOF sheet to prevent direct sunlight over heating the interior of the stack. |
|
London :- C & A Supplies Ltd, Bidder Street, London E16 4ST
Kent Branch :- C & A Building Plastics, Courteney Road, Gillingham, Kent ME8 0EZ
Tel 0845 165 165 8 or 0207 474 0474 Fax 0207 474 5055
Tel 01634 374444 Fax 01634 366644
Or send us an Email using the contact us link
Please see our delivery section for areas covered and contact details
All pages and graphics on this Web site are © Copyright of C & A Supplies Ltd
Site Designed By D.Beaumont 
